Mouthguard-Type Wearable Sensor for Monitoring Salivary Turbidity to Assess Oral Hygiene.

Salivary turbidity is a promising indicator for evaluating oral hygiene. This study proposed a wearable mouthguard-type sensor for continuous and unconstrained measurement of salivary turbidity. The sensor evaluated turbidity by measuring the light transmittance of saliva with an LED and a phototransistor sealed inside a double-layered mouthguard. The sensor was also embedded with a Bluetooth wireless module, enabling the wireless measurement of turbidity. The mouthguard materials (polyethylene terephthalate-glycol and ethylene-vinyl acetate) and the wavelength of the LED (405 nm) were experimentally determined to achieve high sensitivity in salivary turbidity measurement. The turbidity quantification characteristic of the proposed sensor was evaluated using a turbidity standard solution, and the sensor was capable of turbidity quantification over a wide dynamic range of 1-4000 FTU (formazine turbidity unit), including reported salivary turbidity (400-800 FTU). In vitro turbidity measurement using a saliva sample showed 553 FTU, which is equivalent to the same sample measured with a spectrophotometer (576 FTU). Moreover, in vivo experiments also showed results equivalent to that measured with a spectrophotometer, and wireless measurement of salivary turbidity was realized using the mouthguard-type sensor. Based on these results, the proposed mouthguard-type sensor has promising potential for the unconstrained continuous evaluation of oral hygiene.

Choosing Optimal Cutoff Frequencies for Filtering Linear Acceleration and Angular Velocity Signals Associated with Head Impacts Measured by Instrumented Mouthguards.

Head impact sensors worn in the mouth are popular because they couple directly to the teeth and provide six-degree-of-freedom head measurements. Mouthpiece signal filters have conventionally used cutoff frequencies lower than recommended practices (Society of Automotive Engineers, SAE J211-1) to eliminate extraneous noise when measuring with live subjects. However, there is little information about the effects of filter choice on the accuracy of signals measured by instrumented mouthpieces. Lack of standardization in head impact measurement device post-processing techniques can result in data that are not comparable across studies or device brands. This study sought optimal filter cutoff frequencies for six-degree-of-freedom measurements made at the teeth using instrumented mouthguards. We collected linear acceleration and angular velocity signals at the head center of gravity (CG) using laboratory-grade instrumentation. We also collected and filtered similar six-degree-of-freedom measurements from an instrumented mouthguard using 24 cutoff frequencies, from 25 to 600 Hz. We transformed the measurements to linear acceleration at the center of gravity of the head (CG) using all kinematic variables at the teeth, optimizing linear and angular mouthguard cutoff frequencies with one equation. We calculated the percent error in transformed peak resultant linear acceleration and minimized the mean and standard deviation in error. The optimal cutoff frequencies were 175 Hz for linear acceleration and 250 Hz for angular velocity. Rigid impacts (3-5 ms duration) had higher optimal cutoff frequencies (175 Hz linear acceleration, 275 Hz angular velocity) than padded impacts (10-12 ms duration; 100 Hz linear acceleration, 175 Hz angular velocity), and all impacts together (3-12 ms duration; 175 Hz linear acceleration, 250 Hz angular velocity). Instrumented mouthpiece manufacturers and researchers using these devices should consider these optimal filter cutoff frequencies to minimize measurement error. Sport-specific filter criteria for teeth-based sensors may be warranted to account for the difference in optimal cutoff frequency combination by impact duration.

A Shear-Stiffening Mouthguard with Excellent Shock Absorption Capability and Remoldability via a Dynamic Dual Network.

Mouthguards are used to reduce injuries and the probability of them to orofacial tissues when impacted during sports. However, the usage of a mouthguard is low due to the discomfort caused by the thickness of the mouthguard. Herein, we have constructed a dynamic dual network to fabricate a shear-stiffening mouthguard with remoldability, which are called remoldable shear-stiffening mouthguards (RSSMs). Based on diboron/oxygen dative bonds, RSSMs show a shear-stiffening effect and excellent shock absorption ability, which can absorb more than 90% of the energy of a blank. Even reducing the thickness to half, RSSMs can reduce approximately 25% of the transmitted force and elongate by about 1.6-fold the buffer time compared to commercial mouthguard materials (Erkoflex and Erkoloc-pro). What is more, owing to the dynamic dual network, RSSMs show good remolding performance with unchanged shear-stiffening behavior and impact resistance, which conforms to the existing vacuum thermoforming mode. In addition, RSSMs exhibit stability in artificial saliva and biocompatibility. In conclusion, this work will broaden the range of mouthguard materials and offer a platform to apply shear-stiffening materials to biomedical applications and soft safeguarding devices.

The International Association of Dental Traumatology (IADT) and the Academy for Sports Dentistry (ASD) guidelines for prevention of traumatic dental injuries: Part 3: Mouthguards for the prevention of dental and oral trauma.

The Guidelines for Prevention of Traumatic Dental Injuries were reviewed and approved by the Board of Directors of the International Association of Dental Traumatology (IADT) and the Academy for Sports Dentistry (ASD).

Faculty of sports science students, physical education teachers, and athletes' level of knowledge and attitude about mouthguards.

OBJECTIVES: Traumatic dental injury occurs during sports competitions, training, and practice and can be prevented by the use of mouthguards. For this reason, this study aimed to evaluate the knowledge and attitudes of sports science faculty students, physical education teachers, and athletes about mouthguards. METHODS: Five hundred thirty-two participants were reached via social media. In the questionnaire consisting of 20 questions, questions about the sociodemographic characteristics of the participants were asked in part 1, and questions about their level of knowledge and attitudes about the mouthguards were asked in part 2. Descriptive statistical analysis and a chi-square test were used to evaluate the data. RESULTS: The number of people who think that mouthguards protect the athlete from traumatic dental injury is 381 (71.6%). The number of people who think that mouthguards affect the performance of the athlete is positively 228 (42.9%). To protect against traumatic dental injury, 51.48% of the participants preferred the custom-made; 39.3% of them preferred the boil-bite; 33.22% of them preferred the standard/stock type mouth guard; and 22.96% of them preferred the helmet, and 18.26% of them preferred the face mask. CONCLUSIONS: The knowledge and attitude of sports science faculty students, physical education teachers, and athletes are low about mouthguards. Since these people who are engaged in sports have a high exposure to traumatic dental injuries, education should be given to increase their awareness about mouthguards.

Assessing potential human health and ecological implications of PFAS from leave-in dental products.

Contaminated water and food are the main sources of documented per- and polyfluoroalkyl substances (PFAS) exposure in humans. However, other sources may contribute to the overall PFAS intake. While several studies documented the presence of PFAS in consumer products, PFAS evaluation in dental products has been limited to floss and tape to date. This study estimated PFAS exposures from a convenience sample of leave-in dental products (night guards and whitening trays), which remain in contact with the mouth for longer durations than previously evaluated dental products. This analysis evaluated whether consumer usage of these dental products meaningfully contributes to oral exposure of PFAS. Leaching of PFAS upon disposal of products was also considered. Out of 24 PFAS measured, perfluorobutanoic acid (PFBA; 3.24-4.17 ng/product or 0.67-0.83 ng/g) and perfluorooctanesulfonic acid (PFOS; 7.25-16.45 ng/product or 1.2-2.3 ng/g) were detected in night guards, and no PFAS were detected in whitening trays. Non-targeted analysis showed additional possible PFAS, which could not be characterized. The findings showed that PFOS and/or PFBA present in night guards were unlikely to pose a health concern. From an ecological perspective, the dental products examined were shown to constitute a negligible contribution to environmental PFAS. In conclusion, the examined dental products do not represent a significant source of exposure to PFAS for humans or the environment. The study demonstrates how risk assessment can be integrated by the industry into product stewardship programs to evaluate the potential health and environmental impacts of chemicals in consumer products.

Capturing Head Impacts in Boxing: A Video-Based Comparison of Three Wearable Sensors.

Wearable sensors are used to quantify head impacts in athletes, but recent work has shown that the number of events recorded may not be accurate. This study aimed to compare the number of head acceleration events recorded by three wearable sensors during boxing and assess how impact type and location affect the triggering of acceleration events. Seven boxers were equipped with an instrumented mouthguard, a skin patch, and a headgear patch. Contacts to participants' heads were identified via three video cameras over 115 sparring rounds. The resulting 5168 video-identified events were used as reference to quantify the sensitivity, specificity, and positive predictive value (PPV) of the sensors. The mouthguard, skin patch, and headgear patch recorded 695, 1579, and 1690 events, respectively, yielding sensitivities of 35%, 86%, and 78%, respectively, and specificities of 90%, 76%, and 75%, respectively. The mouthguard, skin patch, and headgear patch yielded 693, 1571, and 1681 true-positive events, respectively, leading to PPVs for head impacts over 96%. All three sensors were more likely to be triggered by punches landing near the sensor and cleanly on the head, although the mouthguard's sensitivity to impact location varied less than the patches. While the use of head impact sensors for assessing injury risks remains uncertain, this study provides valuable insights into the capabilities and limitations of these sensors in capturing video-verified head impact events.

On-field instrumented mouthguard coupling.

Instrumented mouthguard (iMG) sensors have been developed to measure sports head acceleration events (HAE) in brain injury research. Laboratory validation studies show that effective coupling of iMGs with the human skull is crucial for accurate head kinematics measurements. However, iMG-skull coupling has not been investigated in on-field sports settings. The objective of this study was to assess on-field iMG coupling using infrared proximity sensing and to investigate coupling effects on kinematics signal characteristics. Forty-two university-level men's ice hockey (n = 21) and women's rugby (n = 21) athletes participated in the study, wearing iMGs during 6-7 month in-season periods. Proximity data classified video-verified HAE recordings into four main iMG coupling categories: coupled (on-teeth), decoupling (on-teeth to off-teeth), recoupling (off-teeth to on-teeth) and decoupled (off-teeth). Poorly-coupled HAEs showed significantly higher peak angular acceleration amplitudes and greater signal power in medium-high frequency bands compared with well-coupled HAEs, indicating potential iMG movements independent of the skull. Further, even video-verified true positives included poorly-coupled HAEs, and iMG coupling patterns varied between the men's hockey and women's rugby teams. Our findings show the potential of using proximity sensing in iMGs to identify poorly-coupled HAEs. Utilizing this data screening process in conjunction with video review may mitigate a key source of sensor noise and enhance the overall quality of on-field sports HAE datasets.

Mouthguards Based on the Shear-Stiffening Effect: Excellent Shock Absorption Ability with Softness Perception.

Mouthguards are used to prevent craniomaxillofacial injuries when collisions happen during contact and high-speed sports. However, poor compliance with mouthguard wear in athletes is attributed to discomfort because of its thickness and hardness. These drawbacks significantly restrict their protective performance for oral tissues and applications during contact sports; as a result, the incidence of craniomaxillofacial injuries increases. In this study, non-Newton material is introduced into mouthguard material and then a mouthguard with shear-stiffening behavior is fabricated, which is named the shear-stiffening mouthguard (SSM). Compared with commercial mouthguard materials (Erkoflex and Erkoloc-pro), SSMs show remarkable enhancement of shock absorption ability with an approximately 60% reduction in peak force relative to commercial materials and approximately 3-fold extensive buffer time. Moreover, Young's modulus of SSMs (average 0.48 MPa) is extremely lower compared to commercial materials (22.88 MPa for Erkoflex and 26.71 MPa for Erkoloc-pro). This manifests that SSMs have not only excellent shock absorption ability but also softness perception. Moreover, SSMs show biocompatibility in vitro. In conclusion, this work provides a platform to develop a new type of thin and soft mouthguard with a shear-stiffening effect and broadens the horizon in protecting oral tissues with shear-stiffening materials.

Prevention of Dental trauma.

Traumatic dental injuries (TDIs) occur commonly in children and young adults with one in three adults having experience of a TDI to their permanent dentition. Although the management of TDIs have evolved vastly, the consequences of TDIs can still be profound and generally carry a high burden for the patient, family, or carer, as well as the clinician and healthcare services. Hence, prevention of TDIs where possible is key. It is important to ensure that all risk factors for dental trauma are fully explored to allow preventative advice to be tailored to each patient. General Dental Practitioners are well placed to establish a rapport with patients owing to the continuity of care that is commonly seen in dentistry, however, it is imperative that the appropriate questions are asked.This article aims to review dental trauma highlighting the significance of identification of clinical and social risk factors and prevention of TDIs. These risk factors are further divided into modifiable and non-modifiable risk factors which can guide the clinician on what further action is required and when other members of the dental or medical team should be involved. The importance of patient education in prevention of TDIs, including use of mouthguards in sport, and mouthguard design will be discussed.

The use of mouthguards and related factors among basketball players in Indonesia.

BACKGROUND: Basketball is a sport with a higher injury rate. Regardless, few basketball players use mouthguards, which predisposes them to injuries. The use of mouthguards (UoM) could be related to several factors. This study aims to identify factors associated with UoM and to construct a model from the factors among basketball players in Indonesia. METHODS: Through convenience sampling, a total of 286 among basketball players in Indonesia was included in this cross-sectional study. These participants filled out online a modified questionnaires regarding demographic and several factors related to UoM. The data was analyzed using chi-square test, independent-sample t-test, binary logistic regression, and structural equation modeling (SEM). RESULTS: There were 286 players. 127 of them were males and 159 were females. Of them, 86 (30.1%) used mouthguards. Age, duration (in year), and weekly practicing basketball (in hour) were all significantly different between mouthguards users and non-users with (p = 0.005, p = 0.036 and p = 0.035), respectively. The UoM was significantly associated with level of awareness, injury experience, social support, and oral health professional (OHP) support with (p = 0.002, p < 0.001, p < 0.001 and p < 0.001), respectively. This result was also supported by a variety of variables' ORs, which range from 1.28 to 5.97. The coefficient of determination (R2) was 0.27. CONCLUSIONS: The UoM among basketball players in Indonesia was related to several factors, including the level of knowledge, level of awareness, duration of basketball career, injury experiences, social support, and oral health professionals' support which was constructed to propose a model. The model could explain 27% of the relationship between variables and UoM among Indonesian basketball players. This model will be useful for more comprehensive initiatives to promote oral health. It might be applicable for other countries as well as other sports communities / physical activities.

Global research trends of studies related to mouthguards and dental injuries in sports activities: a bibliometric analysis.

Mouthguards (MGs) are essential devices for the protection of sports-related orofacial injuries. Mapping of the literature on this subject may help to guide future studies; therefore, this review aimed to characterize the research trends of studies related to MGs and dental injuries in sports activities through bibliometric analysis of in vivo studies concerning the frequency of MG use; knowledge, awareness, perception, and/or attitude about MGs; and adaptation (fit) of MGs in the mouth and/or prevention of traumatic dental injuries (TDIs). A literature search was performed in 6 databases for studies published up to April 2022. Text mining and analysis software was used to extract and evaluate data related to the study author, country, keywords, journal of publication, and year. Additionally, data related to the type of study, outcome, study population, age group, evaluation method, type of MG, sport classification, and sport category were extracted and analyzed. Of 6140 records identified, 222 were included in the analysis. Most of the articles came from the United States (n = 39; 17.5%) and dentistry journals (n = 145; 65.3%). The journal Dental Traumatology (n = 60; 27.0%) presented the highest number of publications. Most studies were observational (n = 195; 87.8%) and evaluated the frequency of MG use (n = 163; 44.4%). Studies were carried out in athletes (n = 181; 82.6%) and adults (n = 169; 49.1%) using questionnaires or interviews for assessment (n = 206; 84.1%). Only 89 (40.1%) studies evaluated the type of MG, mostly involving contact sports. Custom-made MGs were most commonly studied. More studies involving coaches, dentists, and child and teenaged athletes are warranted to help prevent sportsrelated TDIs in young teeth, mainly through interventional studies on the perceptions of and knowledge about MGs among these populations.

Influence of wearing mouthguards on performance among athletes: A systematic review.

OBJECTIVES: While the use of mouthguards is well established to prevent orofacial and dental trauma occurrence, limited evidence exists regarding their influence on athletic performance. The objective of this study was to conduct a systematic review of the literature to assess the effect of wearing mouthguards on athletic performance. DESIGN: Systematic review. METHODS: An extensive search was performed in the databases of PubMed/MEDLINE, Embase, Scopus and Cochrane Library for studies published up to August 2022. Only peer-reviewed studies involving humans in vivo and investigating the use of mouthguards on performance among athletes were included. Quality assessment was performed using the Cochrane Collaboration's risk of bias tool. RESULTS: The initial query yielded 4785 citations, of which 41 studies met the inclusion criteria, comprising a total of 852 athletes. Overall, wearing mouthguards was found to improve athletic performance compared to the control group (without mouthguards). Custom-made mouthguards were found to be more effective in enhancing athletic performance compared to other types of mouthguards. CONCLUSIONS: Wearing mouthguards should be advocated by athletes not only for the prevention of orofacial and dental trauma but also for their potential improvements in athletic performance in specific actions. However, caution must be exercised in interpreting these findings due to the variability in outcome measures and the lack of important methodological details.

Knowledge of traumatic dental injuries and mouthguard behavior among Croatian soccer players.

OBJECTIVES/AIM: Sports-related dental injuries occur frequently among athletes due to inadequate knowledge and prevention measures. The aim of the study was to assess knowledge, attitudes, and practices of active soccer players from all leagues in Croatia regarding traumatic dental injuries and the use of mouthguards. MATERIAL AND METHODS: 393 respondents completed a questionnaire-based online survey from March 2022 to April 2022. The questionnaire consisted of 37 questions divided in four sections: demographic characteristics, experience with orofacial injuries, knowledge of emergency therapeutic procedures for dental injuries, and behaviors related to the use of a mouthguard. RESULTS: Insufficient knowledge was confirmed by a total score of 2.8 ± 2.8 points, with a possible maximum of 11. Respondents' better knowledge can be associated with educational level (p = .002), playing position (p = .046), and personally experienced injuries to the face and jaw (p ≤ .001) and teeth (p = .022). Less than 40% of respondents suffered facial and jaw injuries while playing football and 18.6% suffered dental injuries. Although most respondents (93.9%) were familiar with mouthguards and 68.9% believed that they help prevent injuries while playing football, only 16% used them. CONCLUSION: The study revealed significant gaps in knowledge regarding dental injuries and the practice of mouthguard usage among Croatian soccer players. Therefore, it is evident that additional education is needed to prevent dental injuries and take proper procedures when taking care of them among the examined population.

Real-Time Continuous Monitoring of Oral Soft Tissue Pressure with a Wireless Mouthguard Device for Assessing Tongue Thrusting Habits.

In orthodontics, understanding the pressure of oral soft tissues on teeth is important to elucidate the cause and establish treatment methods. We developed a small wireless mouthguard (MG)-type device that continuously and unrestrainedly measures pressure, which had previously been unachieved, and evaluated its feasibility in human subjects. First, the optimal device components were considered. Next, the devices were compared with wired-type systems. Subsequently, the devices were fabricated for human testing to measure tongue pressure during swallowing. The highest sensitivity (51-510 g/cm2) with minimum error (CV < 5%) was obtained using an MG device with polyethylene terephthalate glycol and ethylene vinyl acetate for the lower and upper layers, respectively, and with a 4 mm PMMA plate. A high correlation coefficient (0.969) was observed between the wired and wireless devices. In the measurements of tongue pressure on teeth during swallowing, 132.14 ± 21.37 g/cm2 for normal and 201.17 ± 38.12 g/cm2 for simulated tongue thrust were found to be significantly different using a t-test (n = 50, p = 6.2 × 10-19), which is consistent with the results of a previous study. This device can contribute to assessing tongue thrusting habits. In the future, this device is expected to measure changes in the pressure exerted on teeth during daily life.

Biomechanical effects of a hard insert and air space in mouthguards on the shock absorption and protection against fractures of direct resin composite veneers from trauma.

BACKGROUND/AIM: Mouthguards (MTG) are used to prevent dental trauma. However, their protective effect on esthetic restorations and whether modified MTGs are beneficial is uncertain. The aim of this study was to evaluate the effect of hard inserts and air spaces in MTGs in protecting direct resin composite veneers during impact. MATERIALS AND METHODS: Twenty resin composite veneers (1.0 mm) were prepared on upper right central incisors on printed maxilla models using polyether. The effect of the MTGs was evaluated in four groups (n = 5): Con-MTG, conventional custom-fit MTGs made with two layers of ethylene vinyl acetate (EVA); Air-MTG, MTGs with the insertion of 2.0 mm air space between the two layers of EVA and tooth surface; PETG-MTG, MTGs with 1.0 mm of polyethylene terephthalate glycol-modified (PETG) inserted between the EVA layers; and No-MTG, comprising resin composite veneers without MTG. The printed models were fixed in a pendulum device, and the impact was performed at 30°. The strain (µS) and shock absorption (%) of the MTG were recorded using strain gauges. Failure modes and cracks were evaluated using macro photography and transillumination and analyzed using the chi-square test. Strain and shock absorption data were analyzed using the one-way analysis of variance followed by Tukey's test (α = 0.05). RESULTS: Mouthguards reduced strain and enhanced shock absorption, regardless of the MTG type (p < .001). Con-MTG, Air-MTG, and PETG-MTG had shock absorption rates of 76.1%, 72.3%, and 33.4%, respectively (p < .001). The single No-MTG model had a root fracture, while all the others had superficial damage. None of the MTG models had cracks or fractures. CONCLUSIONS: Mouthguards protected the resin composite veneers. The Con-MTG and Air-MTG groups had lower strain and greater shock absorption than the PETG-MTG. Resin veneers had no cracks or damage following MTG use. However, 80% of the veneers had surface damage when no MTG was used.

Machine-learning-based head impact subtyping based on the spectral densities of the measurable head kinematics.

BACKGROUND: Traumatic brain injury can be caused by head impacts, but many brain injury risk estimation models are not equally accurate across the variety of impacts that patients may undergo, and the characteristics of different types of impacts are not well studied. We investigated the spectral characteristics of different head impact types with kinematics classification. METHODS: Data were analyzed from 3262 head impacts from lab reconstruction, American football, mixed martial arts, and publicly available car crash data. A random forest classifier with spectral densities of linear acceleration and angular velocity was built to classify head impact types (e.g., football, car crash, mixed martial arts). To test the classifier robustness, another 271 lab-reconstructed impacts were obtained from 5 other instrumented mouthguards. Finally, with the classifier, type-specific, nearest-neighbor regression models were built for brain strain. RESULTS: The classifier reached a median accuracy of 96% over 1000 random partitions of training and test sets. The most important features in the classification included both low- and high-frequency features, both linear acceleration features and angular velocity features. Different head impact types had different distributions of spectral densities in low- and high-frequency ranges (e.g., the spectral densities of mixed martial arts impacts were higher in the high-frequency range than in the low-frequency range). The type-specific regression showed a generally higher R2 value than baseline models without classification. CONCLUSION: The machine-learning-based classifier enables a better understanding of the impact kinematics spectral density in different sports, and it can be applied to evaluate the quality of impact-simulation systems and on-field data augmentation.